Pioneer RCS-404H, RCS-505H, RCS-606H manual Getting started Chapter, System demo setting

Getting started

Chapter 2

Getting started

Important

•To access green functions on the remote, move the slider switch from MAIN to SUB.

System demo setting

Switches the automatic demo feature on or off (this starts when you plug in for the first time).

			SURROUND ADVANCED		SOUND	TV/DVD
AUDIO	SUBTITLE	ANGLE	PLAY MODE	0
			SLEEP		CLEAR	JUKE BOX
		TIMER REC	REC MODE	+	+
			INPUT	CHANNEL	VOLUME	DISPLAY
SETUP	/TUNE+	SR+ ONETOUCHCOPY		–	–
1	2	3		TV CONTROL		RDS DISP
/ST–	ENTER	/ST+	MENU
4	5	6	MAIN	SUB		AXD7442
MCACC	/TUNE– TEST TONE		VIDEO IN

7 8 9

	SURROUND ADVANCED SOUND	TV/DVD
1	Switch the system into standby.
2	Press SETUP.
3	Use the	buttons to select DEMO from the
menu, then press ENTER.
4	Use the	buttons to select a setting, then
press ENTER.
Select from:

•DEMO ON – Switches the demo display on.

•DEMO OFF – Switches the demo display off and the system into standby.

Using the Auto MCACC setup for optimal surround sound

The Multichannel Acoustic Calibration (MCACC) system measures the acoustic characteristics of your listening area, taking into account ambient noise, and testing for channel delay and channel level. After you have set up the microphone provided, the system uses the information from a series of test tones to optimize the speaker settings and equalization (Acoustic Calibration

EQ) for your particular room.1

Important

•The test tones used for Auto MCACC setup are loud; however, do not turn the volume down during setup as this may result in a sub-optimal setup.

•Make sure the microphone and speakers are not

moved during the MCACC setup.

						TIMER REC	REC MODE	0
RECORDER			RECEIVER				SLEEP		CLEAR	JUKE BOX
					/TUNE+	SR+ ONETOUCHCOPY		+	+
				1	2	3	INPUT	CHANNEL	VOLUME	DISPLAY
HDD/DVD	FM/AM	AUDIO IN	SOUND	/ST–		/ST+	MENU	–	–
			RETRIEVER	4	5	6		TV CONTROL		RDS DISP
				MCACC	/TUNE– TEST TONE		VIDEO IN
PAUSE	PLAY		STOP	7	8	9	MAIN	SUB		AXD7442
				SURROUND	ADVANCED	SOUND	TV/DVD
REC	STOP REC	HELP	INFO		0
				SLEEP		CLEAR	JUKE BOX
TOP MENU					+	+
				INPUT	CHANNEL	VOLUME	DISPLAY
DISC	HOMEMENU

1Connect the microphone to the MCACC SETUP MIC jack on the rear panel.

						ANTENNA
			MCACC	CONTROL IN
			SETUP MIC
						FM			AM
						UNBAL 75Ω			LOOP ANTENNA
							AUDIO	INPUT
	CONTROL		SPEAKERS				DIGITAL
SYSTEM CONNECTOR					L	DVD/DVR 1	DVD/DVR 2	DIGITAL	ANALOG
	OUT	SUB WOOFER	R SURROUND			(COAXIAL)	(OPTICAL)	(OPTICAL)
									L
									R
USE ONLY WITH
DISPLAY UNIT		CENTER	R	FRONT	L
	AC IN

2Place the microphone at your normal listening position.

Place the mic horizontally about ear level at your normal listening position using a table or chair.

Make sure there are no obstacles between the speakers and the microphone.

02

English

Note

1 You only need to use the Auto MCACC setup once (unless you change the placement of your speakers or your room layout).

23

En