Pioneer RCS-606H manual Setting up the remote to control your, Using the TV remote control buttons

16Additional information

Chapter 16

Additional information

Setting up the remote to control your

TV

Using the TV remote control buttons

The table below shows how to use this remote control with your TV.

You can use the supplied remote to control your TV. To be able to use this feature you first have to program the remote with a maker code from the table on the following page.

1Switch on your TV.

2Press and hold down the CLEAR button, then enter the maker code for your TV.

See the table on the next page for the list of maker codes. If there is more than one code given for your make, input the first one in the list.

•If the maker’s name of your TV doesn’t appear in the table, you will not be able to use this remote to control your TV.

3Point the remote towards your TV and press TV to check that the remote works with your TV.

If the remote is set up correctly, the TV should switch off. If it doesn’t and there is another code given for your maker, repeat step 1 with a new code.

Button	What it does
TV	Press to switch the TV on/off (standby)
INPUT	Press to change the TV’s video input
TV VOLUME	Use to adjust the TV volume
TV CHANNEL	Use to change TV channels

136

En