DirecTV Digital Satellite Recorder Recorder & Phone Setup, C o r d e r & P h o n e S e t u p

R e c o r d e r & P h o n e S e t u p

Recorder & Phone Setup

Options under Recorder & Phone Setup affect the basic functioning of the recorder. Most of these settings were established before or during Guided Setup, and you may not ever need to change them.

Satellite Dish Setup

If you have a loss of signal and wish to diagnose the problem, or you need to re-point your satellite dish antenna, or if you add additional equipment, you can select “Satellite Dish Setup” to reconfigure your satellite dish antenna setup.

Test Signal Strength. This screen shows approximate pointing information for your
satellite dish antenna. You can also use this screen to check the strength of the signal
received from each transponder on a selected satellite dish antenna. It shows you the
signal strength from individual transponders one at a time. To be sure you receive all of	6
your channels, you should check signal strength on all transponders.

A transponder is a piece of radio equipment on a satellite. The DIRECTV transponders receive information from DIRECTV and rebroadcast it to your satellite dish antenna. Different channels are rebroadcast by different transponders, and different satellites have different numbers of transponders.

Note: You can check signal strength while you adjust the pointing of your satellite dish antenna. The signal strength meter on this screen provides audio feedback—a tone that becomes higher pitched as the signal gets stronger. You may be able to turn the volume on your TV up so you can hear the tone while you adjust the position of your satellite dish antenna. Alternatively, you might have someone watching the signal strength meter and

DIRECTV Central Messages and Setup Recorder and Phone Setup Satellite Dish Setup 99