Pioneer RCS-404H Other connections, Using this unit with a Pioneer plasma display, Want to adjust

Other connections 06

For an external FM antenna, Use a PAL connector to hook up an external FM antenna.

PAL connector

Using this unit with a Pioneer plasma display

If you have a Pioneer plasma display1, you can use an

SR+ cable2 to connect it to this unit and take advantage of various convenient features, such as controlling this unit via the plasma display’s remote sensor, automatic video input switching of the plasma display, display unit messages appearing on the plasma display screen, and automatic volume muting on the plasma display.

Media receiver

CONTROL

OUT

Pioneer plasma display

	ANTENNA
MCACC	CONTROL IN
SETUP MIC	FM	AM
	UNBAL 75Ω	LOOP ANTENNA

							AUDIO	INPUT
	CONTROL		SPEAKERS				DIGITAL
SYSTEM CONNECTOR						DVD/DVR 1	DVD/DVR 2	DIGITAL	ANALOG
	OUT	SUB WOOFER	R SURROUND		L
						(COAXIAL)	(OPTICAL)	(OPTICAL)
									L
USE ONLY WITH									R
DISPLAY UNIT		CENTER	R	FRONT	L
	AC IN

Important

•With an SR+ cable connected, the remote must now be pointed towards your plasma display rather than the display unit of the receiver subwoofer in order to control the receiver subwoofer.

•Use a 3-ringed miniplug SR+ cable to connect the CONTROL IN jack of this unit (through a media receiver, if applicable) to the CONTROL OUT jack of

your plasma display.3

Before you can use the extra SR+ features, you need to make a few settings in the unit—see SR+ Setup for Pioneer plasma displays below.

SR+ Setup for Pioneer plasma displays

Make the following settings if you have connected a Pioneer plasma display to this unit using an SR+ cable.

				TIMER REC REC MODE
		SET UP		SR+ ONETOUCHCOPY
		1	2	3
			ENTER		MENU
		4	5	6
		MCACC		TEST TONE VIDEO IN
		7	8	9
		SURROUND ADVANCED		SOUND	TV/DVD
			0
		SLEEP		CLEAR	JUKE BOX
			+	+
		INPUT	CHANNEL	VOLUME	DISPLAY
			–	–
			TV CONTROL		RDS DISP
		MAIN	SUB		AXD7442
1	Press SR+.
2	Use the	buttons to choose SETUP, then
press ENTER.
3	Use the	buttons to choose the setting you
want to adjust.

The current setting is shown for each option as you cycle through the display. See below for a full list and description of each.

4 Use the buttons to adjust the setting.

5Repeat steps 3 and 4 to make other settings.

6When you’re done, press ENTER to leave the SR+ setup menu.

English

Note

1 This system is compatible with all Pioneer plasma displays from 2003 onward.

2The 3-ringed SR+ cable from Pioneer is commercially available under the part number ADE7095. Contact the Pioneer Customer Support division for more information on obtaining an SR+ cable.

3You won’t be able to use the remote sensor of this unit with the CONTROL IN jack of this unit connected to the CONTROL OUT jack of your plasma display. You can use the remote sensor of the plasma display (even in standby) as long as the power isn’t switched off.

35

En