Pioneer RCS-505H, RCS-606H manual Video Adjust menu, Setting the picture quality for disc playback

14The Video Adjust menu

•Hue – Adjusts overall balance between red and green.

•Chroma Level – Adjusts how rich the colours appear.

	ENTER
4	Adjust the currently selected setting.
5	HOME MENU Press to exit.

You can now use the preset for any other input or the built-in TV tuner.

Tip

• To see more of the picture as you adjust different

Creating your own set

There are three user presets in which you can save your own set of picture quality settings for disc playback.

1Follow Choosing a preset above and select one of the user presets (Memory 1, 2 or 3).

2Move the cursor down and select ‘Detailed Settings’.

Memory1

Detailed Settings

3Select the picture quality setting you want to adjust.

settings, press ENTER after selecting the setting you

want to adjust.

Setting the picture quality for disc playback

This setting determines how the picture will look when playing discs.

Memory1
Prog. Motion	Motion
PureCinma
YNR	Off
BNR	Off
MNR	Off
Detail	Off
White Level	Min

Still

Auto1

Max

Max

Max

Max

Max

Choosing a preset

1HOME MENU With a disc playing (or paused), press to display the Home Menu.

	ENTER
2	Select ‘Video Adjust’.
	ENTER
3	Select a setting.

TV

Detailed Settings

There are six presets available:

•TV – suitable for LCD and cathode-ray tube TVs

•PDP – suitable for plasma display screens

•Professional – suitable for professional monitors

•Memory1 – user preset 1

•Memory2 – user preset 2

•Memory3 – user preset 3

You can press DISPLAY to see the individual settings for the current preset (TV, PDP or Professional).

126

You can adjust the following settings:

•Prog. Motion – Adjusts the motion and still picture quality when video output is set to progressive.

•PureCinema – This setting optimizes the picture for film material when the video output is set to progressive. Usually this is best left set to Auto 1; try switching to Auto 2, On or Off if the picture appears unnatural.

•YNR – Adjusts the amount of noise reduction (NR) applied to the Y (brightness) component.

•BNR – Adjusts the amount of noise reduction (NR) applied to the block noise (artefacts visible in areas of flat colour, caused by MPEG compression).

•MNR – Adjusts the amount of noise reduction (NR) applied to the mosquito noise (artefacts visible around the edges of an image, caused by MPEG compression).

•Detail – Adjusts how sharp edges appear.

•White Level – Adjusts the intensity of white.

•Black Level – Adjusts the intensity of black.

•Black Setup – Corrects the standard reference black level (NTSC video playback only).

•Gamma Correction – Adjusts the brightness of darker images.

•Hue – Adjusts overall balance between red and green.

•Chroma Level – Adjusts how rich the colours appear.

En