Pioneer RCS-505H, RCS-606H Extending a timer recording in progress, Stopping a timer recording

Recording

6 ENTER Set the start time.

The start date and time is displayed in the middle of the screen.

•You can go back and reset the start time if you need to by pressing RETURN.

	ENTER
7	Move the cursor to the recording end

time on the grid.

Recording start time

Recording end time

Easy Timer Recording
11:00	12:00	13:00	14:00		15:00	16:00	17:00
1/01
2/01
3/01
SAT	1/01		11:45		–	13:45
	Pr 7	REC MODE		SP		HDD/DVD	HDD

As you move the cursor around the grid, an arrow stretches from the start time to the current cursor position, representing the length of the recording. A recording of up to six hours can be set.

8	ENTER Set the end time.
	ENTER
9	Select ‘Yes’ to set the timer recording and

exit, or ‘No’ to go back to the Easy Timer Recording screen.

•You can check the timer recording details you just set from the Schedule Area in the GUIDE Plus system; see The Schedule Area on page 68.

Extending a timer recording in progress

You can extend a timer recording beyond the programmed end time. This can be useful if a broadcast program overruns, for example.

Canceling or extending the timer

REC

1 Press and hold for three seconds during a timer recording.

Recording continues, but the timer indicator disappears from the front panel display indicating that the timer has been canceled.

REC

2 Press repeatedly to extend recording in 30 minute blocks.

Stopping a timer recording

	STOP REC
1	Press during a timer recording.
	ENTER
2	Select ‘Yes’ to confirm.

Preventing use of the recorder before a timer recording (child lock)

You can make all the front panel and remote control buttons inoperative using the child lock feature. This is useful when you set a timer recording and want to make sure that the timer settings are not changed before recording has finished.

RECORDER

1 If the recorder is on, switch it into standby.

2 [Front panel] Press and hold for three seconds to lock the controls.

The front panel display briefly shows LOCK. If any buttons are pressed on the remote or front panel, LOCK is briefly displayed again.

• To unlock the recorder, press and hold STOP on the front panel (while the recorder is stopped) for three seconds until the display shows UNLOCK.

06

English

81

En