Pioneer RCS-505H, RCS-606H, RCS-404H manual Like

Getting started

You should see a grid filled with channel logos and TV

listings information. Use the buttons to review the list. If you notice that there are channels missing, or that there are channels in the list that you don’t get, go to the Editor screen:

• Press	repeatedly until the Menu bar is highlighted.
• Press	until Editor is highlighted. The main area of

the screen now shows a list of channels. Those that are turned ON are displayed in the grid; those that

are OFF are hidden. Use thebuttons to move down the list and turn channels ON or OFF as necessary.

•For any channel that you turn ON, the GUIDE Plus+ system will need to know how it is received (the source) and on which program number. The source may be the built-in tuner of this recorder, or an external receiver. The program number is the number on which the channel can be found on its receiving device/source. The entry in the Editor screen must match this number for correct recording of that channel.

•The above is especially important for the ‘host channel’. Please make sure that the host channel is always switched ON.

SET UP	/TUNE+	SR+
1	2	3
/ST–	ENTER	/ST+
4	5	6
MCACC	/TUNE– TEST TONE
7	8	9
2	ADVANCED	Change the program numbers as you
	0

like.

Changing the program numbers allows you to decide the order in which the channels change when stepping through them sequentially. You can do this to group certain channels together, for example.

3When you’re done, press the BLUE Action button (Home) to get back to the GUIDE Plus+ home screen.

•You can find detailed information on using the GUIDE Plus+ system in the following chapter.

04

English

63

En