Pioneer RCS-404H, RCS-505H, RCS-606H manual Video Adjust menu Chapter, Creating your own set

The Video Adjust menu

Chapter 14

The Video Adjust menu

Using the Video Adjust menu you can set up the picture	Creating your own set
quality for the built-in tuner and external inputs, for disc	There are three user presets in which you can save your
playback, and for recording.	own set of picture quality settings.
	1 Follow Choosing a preset above and select one of
	the user presets (Memory 1, 2 or 3).
Setting the picture quality for TV and
external inputs		ENTER
Picture Creation lets you choose a set of picture quality	2	Select ‘Detailed Settings’.
settings for the built-in TV tuner and for each external
			Pr 1
input. There are several preset settings that suit various
			Memory1
sources, or you can create up to three of your own sets.
			Detailed Settings

14

English

Choosing a preset

ENTER

1 HOME MENU With the recorder stopped, press to

display the Home Menu.

3 Select the setting you want to adjust.

	ENTER
2	Select ‘Video Adjust’.
	ENTER
3	Select a preset.

Pr 1

Memory1
Prog. Motion		Motion
PureCinma		Auto1
3-D Y/C		Motion
YNR		Off
CNR		Off
White	AGC	Off
White	Level	Min

Pr 1

Still

Still

Max

Max

Max

Tuner

Detailed Settings

•Use the VIDEO IN button to switch between the built- in TV tuner and the external inputs.

• Use the buttons to change the channel of the built-in TV tuner.

There are six presets available:

•Tuner – suitable for general TV broadcasts

•VCR – suitable for video cassettes

•DTV/LDP – suitable for digital broadcasts and Laserdiscs

•Memory1 – user preset 1

•Memory2 – user preset 2

•Memory3 – user preset 3

You can press DISPLAY to see the individual settings for the current preset (Tuner, VCR or DTV/LDP).

You can adjust the following settings:

•Prog. Motion – Adjusts the motion and still picture quality when video output is set to progressive.

•PureCinema – This setting optimizes the picture for film material when the video output is set to progressive. Usually this is best left set to Auto; try switching to Off if the picture appears unnatural.

•3-D Y/C – Adjusts the brightness / colour separation (NTSC video input only).

•YNR – Adjusts the amount of noise reduction (NR) applied to the Y (brightness) component.

•CNR – Adjusts the amount of noise reduction (NR) applied to the C (colour) component.

•White AGC – Turn on for automatic white level adjustment.1

•White Level – Adjusts the intensity of white.

•Black Level – Adjusts the intensity of black.

•Black Setup – Corrects the standard reference black level (NTSC video input only).

Note

1 When White AGC is On, the White Level setting can’t be adjusted.

125

En