Pioneer RCS-606H, RCS-505H, RCS-404H manual Additional information

Additional information

Chapter 7

Additional information

07

English

Important

•To access green functions on the remote, move the slider switch from MAIN to SUB.

		TIMER REC	REC MODE
SETUP		SR+ ONETOUCHCOPY
1	2	3
	ENTER		MENU
4	5	6
MCACC		TEST TONE	VIDEO IN

7 8 9

SURROUND ADVANCED SOUND TV/DVD

0

		CLEAR	JUKE BOX
	+	+
INPUT	CHANNEL	VOLUME DISPLAY
	–	–
	TV CONTROL		RDS DISP
MAIN	SUB		AXD7442

Dimming the display

You can choose to dim the display if you find it too bright.1

1 Press SETUP.

2 Use the	buttons to select DIMMER then
press ENTER.

•DTS-CD– Use for playback of DTS-encoded CDs, but note that the beginning of regular CD tracks may be skipped.

Setting the sleep timer

SURROUND ADVANCED SOUND TV/DVD

0

SLEEP		CLEAR	JUKE BOX
	+	+
INPUT	CHANNEL	VOLUME DISPLAY
	–	–
	TV CONTROL		RDS DISP
MAIN	SUB		AXD7442

The sleep timer switches off the receiver subwoofer after a specified time so you can fall asleep without worrying

about it.2

1Press the SLEEP button to select an option. Choose between the following options:

•SLP ON – Switches off after about an hour

•SLP OFF – Cancels the sleep timer

After selecting SLP ON, you can press SLEEP again to check how much time is left. Each line indicates approximately 12 minutes (remaining):

3 Use the	buttons to select LIGHT or DARK	S L P - - - - -
then press ENTER.

DTS CD setting

If you play a DTS-encoded CD, you will need to change this setting to hear the decoded signal.

1Switch the system into standby.

2Press SETUP.

3	Use the	buttons to select CD TYPE from the
menu, then press ENTER.
4	Use the	buttons to select a setting, then
press ENTER.
Select from:

•NORMAL – Use for playback of regular audio CDs. Some DTS-encoded CDs will output noise when played.

Resetting the system

Use this procedure to reset all system settings to the factory default.

1Switch the system on.

2Press and hold SURROUND then press the

STANDBY/ON button on the display unit. The next time you switch on, all the system settings should be reset.

Note

1The display dims when the sleep timer is set, regardless of this setting.

2The display dims when the sleep timer is set. The DVD recorder does not automatically switch off with the sleep timer.

37

En