Pioneer RCS-404H, RCS-505H, RCS-606H Info Area, Editor Area, Setting a manual recording

Using the GUIDE Plus+™ electronic program guide 05

2Press the RED Action button (ShowView).

3Use the number buttons to enter a ShowView programming number.

4In the same way, enter the recording start time, followed by the GREEN Action button (Next) to confirm.

5Enter the recording end time in the same way, followed by the GREEN Action button (Next) to confirm.

6Use the number buttons to enter a channel number, then press the GREEN Action button (Next) to confirm.

English

•If you live in an area not yet covered by the GUIDE Plus+ system you may also have to input a channel number. Follow the on-screen display to do this.

4 Press ENTER to confirm.

Setting a manual recording

1 Select ‘Schedule’ from the Menu bar.

Alternatively, you can press the YELLOW Action button

(Mosaic) and use thebuttons to select a channel from the mosaic, followed by ENTER.

2 Press the GREEN Action button (Manual).

3 Use the number andbuttons to enter the recording date, then press the GREEN Action button (Next).

The Info Area

This area is reserved for additional information such as news, weather reports, stock quotes, and so on, and varies by region. (Note that this feature is not available in all countries/regions.)

The Editor Area

The Editor Area is the central location for you to manage your channels. Any changes you make here will affect what is displayed in the Grid Area. The Editor Area is mainly used when setting up the GUIDE Plus+ system to make any manual changes as necessary.

You can also use the Editor Area if new channels become available in your area, or if you change from cable to satellite, say, or move house.

From the Editor Area you can:

•Display/hide channels in the grid (switch the channel on/off).

•Select a channel source (Tuner, Ext. Rec. 1, Ext. Rec. 2, etc.).

•Enter a channel program number.

71

En