Pioneer RCS-606H manual Speaker Setup Guide, Home theater sound setup RCS-404H/RCS-505H

Speaker Setup Guide

3Secure each of the front and surround speakers using the metal catch provided.

Screw two picture hooks or similar into the wall behind the speaker. Pass a chain or cord around the hooks and through the metal catch so that the speaker is stabilized (make sure to test that it supports the weight of the speaker).

After installing, make sure the speaker is securely fixed.

Chain or cord

Metal catch

Caution

•The metal catch is not a mounting fixture, and the speaker should not be hung directly from the wall using this catch. Always use a chain or cord when stabilizing the speaker.

•Pioneer disclaims all responsibility for any losses or damage resulting from improper assembly, installation, insufficient strength of the installation materials, misuse, or natural disasters.

4 Connect the speaker system.

Refer to Connecting up to connect the speakers properly. After connecting everything, place the speakers as shown in the diagram above for optimal surround sound.

After placing the speakers, run the Auto MCACC setup (page 23) to complete your surround sound setup.

6

Home theater sound setup (RCS-404H/RCS-505H)

Depending on the size and characteristics of your room, you can place your speakers in one of two ways using this system.

Standard surround setup

This is a standard multichannel surround sound speaker setup for optimal 5.1 channel home theater sound.

Front	Front
left	right
Center	Receiver subwoofer
Surround	Surround
left	right

1Attach the smaller non-skid pads to the base of each of the front, surround and center speakers. The four large non-skid pads are for the receiver subwoofer (as shown).

Use the adhesive side of the pads to attach them to the base (flat surface) of each speaker.

Front and surround speakers

Non-skid pads (small) x 20

Center speaker

Non-skid pads	Receiver
(large) x 4	subwoofer

En