Sharp MD-M1H operation manual Preset tuning, Preset memory scan

Within 5 seconds, press the MEMORY button.

(Continued)

■Preset tuning

You can store up to 40 stations in memory (40 sta- tions consisting of any combination of AM and FM stations you like) and recall them.

		3
2,4	3	2,4

To enter stations into memory:

1 Perform steps 1 - 5 in the "Tuning" section.

2 Press the MEMORY button.

MEMORY MEMORY

3 Within 5 seconds, press the PRESET (X or W) button to make the preset channel number flash in the display.

MEMORY

●Store the stations in memory, in order, starting with preset channel 1.

When is displayed, a station has already been stored in this preset number memory.

4 Within 5 seconds, press the MEMORY button to store that station in the selected station pre- set number memory.

MEMORY MEMORY

●If the "MEMORY" and preset number indicators go out before the station is memorised, repeat the operation from step 2.

5 Repeat steps 1 - 4 to set other preset stations, or to change a preset station.

●When a new station is stored in the selected sta- tion preset number memory, the contents previ- ously memorised will be erased.

●To store an RDS station in memory, perform steps 2 - 4 whilst the RDS station name is being dis- played.

To recall a memorised station:

Press the PRESET (X or W) button for less than 0.5 seconds to select the desired station.

●"MEMORY" will appear.

●The stations (preset channel number, frequency and frequency band) which have been stored in memory will appear in the display in numerical order, irrespective of the frequency bands.

Backup function:

The backup function protects all station presets for a few hours should there be a power failure or the AC power lead is removed from the AC socket.

■Preset memory scan

The stations saved in the preset memory can be scanned automatically.

PRESET

(X W)

PRESET

(X W)

1 To scan the preset stations, press the PRESET (X or W) button for more than 0.5 seconds.

●The station preset number will flash and the pro- grammed stations will be tuned in sequentially, for 5 seconds each.

2 Press the PRESET (X or W) button again to stop the memory scan at the desired station.

Note:

When the preset memory does not have any sta- tions stored in it, the preset memory scan will not function.

To erase all memorised stations:

When the unit is in the stand-by mode, hold and press the TUNER and TUNING Xbuttons, and then press the ON/STAND-BY button.

●"PRESET CLR" will appear.

To erase the memorised station:

1 Recall the memorised station to erase by press- ing the PRESET button.

2 Press the CLEAR button.

●"MEMORY" and preset number will flash.

3

4 Repeat steps 1-3 to erase other memorised sta- tions.

17