Sharp MD-M1H Minidisc Operation, MD playback, To remove a MiniDisc, To interrupt playback, Flash

MINIDISC OPERATION

■MD playback

3

1

7

H 4

1 Press the ON/STAND-BY button to turn the power on.

2 Press the MD button.

3 Load a MiniDisc in the direction indicated by the arrow on the MiniDisc, with the labeled side fac- ing up.

●The total number of tracks and the total playing time on the MiniDisc will be displayed.

4 Press the 0 6 button.

●If the MD has a track name, the name will ap- pear and scroll across the display. Then, the elapsed playing time will appear.

●If the MD has no track names, the elapsed play- ing time will appear.

●When the last track has been played back, the unit will stop automatically.

2

2

H

To interrupt playback:

Press the 0 6 button.

●" 6 " will appear.

●Press the 0 6 button again to resume playback from the same point.

To stop playback:

Press the ■ button.

To remove a MiniDisc:

1

4

Press the 7 MD EJECT button.

Notes:

	Flash
DISC
MEMORY
RANDOM	kHz REC
TOTAL
REMAIN	MHz SLEEP

Disc name

(Displayed only when a disc name has been programmed)

DISC TOC
TRACK
MEMORY
RANDOM	kHz REC
TOTAL
REMAIN	MHz SLEEP

Total number of tracks Total playing time

●If TV or radio interference occurs when using the MD, move the unit away from the TV or radio.

●Although MiniDiscs will not normally skip due to vibration, you may hear a skip in the sound if there is continuous vibration.

If the volume is turned up too high, a skip may occur depending on the contents of the MD.

If this happens, turn the volume down and the skipping should stop.

●If an error message is displayed during MD operation, see "ERROR MESSAGES" on page 47.

12