Sharp MD-M1H operation manual 2 2H, To cancel the operation, To stop recording, Continued

(Continued)

■Recording from a CD onto a MiniDisc (One-Touch Editing)

A CD can be recorded to a MiniDisc, starting from the first track, with a one-touch operation.

3

1

3

H 4

2

2H

1

1 Press the ON/STAND-BY button to turn the power on.

2 Press the CD button.

3 Load a compact disc and a recordable MiniDisc.

●The total number of tracks and the total playing time on the CD will be displayed.

●When a new recordable MiniDisc is loaded, it will take about 15 seconds to enter the recording stand-by mode.

4 Press the CD 0 MD EDIT button.

0

TOC	TRACK
	TOC

REC REC

●The compact disc loaded will be recorded in order, starting from the first track. When a MiniDisc runs out of recording space or when a compact disc has been completely recorded, the CD and the MD will stop automatically.

●Recording will begin, starting from the first track of CD.

●After recording (all of the tracks that can be recorded), the unit will stop automatically.

Notes:

●When the CD playing time is longer than the avail- able MD recording time, the recording process will not start even when the CD 0 MD EDIT but- ton is pressed.

Available total number	Available record-
of tracks counting from	ing time
CD first track for recording

●To record as many tracks as are available, press the CD 0 MD EDIT button again.

However, if the available recording time on the MD is less than the length of the first track on the CD, when the CD 0 MD EDIT button is pressed, the following display will appear.

Then, when the CD 0MD EDIT button is pressed again, recording will start. However, when the MD runs out of space, “DISC FULL” will be displayed and the CD and MD will stop.

To check the remaining time available for recording:

1Press the MD button.

2Load a MiniDisc.

3Press the DISPLAY button to find a time fol- lowed by hyphene.

●The total the number of tracks previously re- corded and the available time remaining will be displayed, 4 seconds later, the unit will return to the original display.

To cancel the operation:

Before pressing the CD 0 MD EDIT button, press the ■ button.

To stop recording:

Press the ■ button.

●Playback and recording will stop and the track numbers will be written to the MiniDisc.

Note:

●It is not possible to pause in the recording mode.

29