Sharp MD-M1H operation manual Error Messages

ERROR MESSAGES

When an error message is displayed, proceed as follows:

Error messages	Meaning	Remedy
BLANK MD	● Nothing is recorded.	● Replace it with another disc.
CAN’T EDIT	● A track cannot be edited.	● Change the stop position of the track and
		then try editing it.
CAN’T REC	● Recording cannot be performed correctly	● Re-record or replace the MiniDisc.
	due to vibration or shock in the unit.	● Replace it with another disc.
	● Timer recording is impossible or there is no
	available space on the MD.
CD NO DISC	● A CD has not been loaded.	● Load a CD.
	● The disc data cannot be read.	● Reload the CD.
DISC FULL	● The disc is out of recording space.	● Replace the disc with another recordable
		disc.
FOCUS ERR	● A disc has not been loaded.	● Reload the MiniDisc.
	● The disc data cannot be read.
MD ERR	● Trouble is found.	● Contact the shop where you purchased the
		unit.
MD NO DISC	● A MiniDisc has not been loaded.	● Load a MiniDisc.
	● The disc data cannot be read.	● Reload the MiniDisc.
MECHA ERR*	● There is a mechanical problem and the disc	● Set this unit to the stand-by mode and press
(*:Number or	is not working properly.	the MD EJECT button.
symbol)
NAME FULL	● The number of characters for the disc name	● Shorten the disc or track name.
	or track name exceeds 40.
NOT AUDIO	● The data recorded on this disc is not audio	● Select another track.
	data.	● Replace the disc.
PLAY MD	● You tried to record on a playback-only disc.	● Replace it with another recordable disc.
PROTECTED	● The disc is write protected.	● Move the write protection tab back to its
		original position.
READ ERR	● The disc is damaged.	● Reload the disc or replace it.
	● A TOC is not written on the MD or there is
	something wrong with data.
TEMP OVER	● The temperature is too high.	● Set this unit to the stand-by mode and wait
		for a while.
TOC ERR*	● The disc is damaged.	● Replace it with another disc.
(*:Number or	● TOC information cannot be read.
symbol)	● MD not specified.
TOC FULL*	● There is no space left for recording charac-	● Replace it with another recordable disc.
(*:Number or	ter information (track names, disc names,
symbol)	etc.).
TOC W ERR	● Recording is impossible.	● Contact the shop where you purchased the
		unit.
U TOC ERR*	● TOC information recorded on the MD does	● Replace it with another disc.
(*:Number or	not match the MD specifications or it can-	● Erase the disc and try recording again.
symbol)	not be read.
U TOC ERR W	● The TOC information could not be created	● Set this unit to the stand-by mode and try to
	properly due to a mechanical shock or to	write the TOC again. (Remove any source
	scratches on the disc.	of shock or vibration whilst writing.)
? DISC	● The data contains an error.	● Replace it with another disc.
00:00	● Music is not being recorded.	● Replace the disc with another recordable
		disc.

47