Sharp MD-M1H operation manual Preparation for USE, Aerial connection, Speaker connection

PREPARATION FOR USE

●Unplug the AC power lead from the AC socket before connecting or disconnecting any com- ponent.

■ Aerial connection
1	2	3
External FM aerial		AM loop aerial
		FM aerial
		FM
		75 OHMS
		AM LOOP

Supplied FM aerial

Connect the FM aerial wire to the FM 75 OHMS socket and position the FM aerial wire in the direc- tion where the strongest signal can be received.

Supplied AM loop aerial

Connect the AM loop aerial wire to the AM LOOP socket.

Position the AM loop aerial for optimum reception. Place the AM loop aerial on a shelf, etc., or attach it to a stand or a wall with screws (not supplied).

Notes:

●Do not place the aerial on the main unit as it may result in noise pickup from the internal digital elec- tronics.

Place the aerial away from the unit for better re- ception.

●If the AM loop aerial and the FM aerial wire are placed near the AC power lead, interference may result.

External FM aerial

Use an external FM aerial if you require better re- ception.

Consult your dealer.

■ Speaker connection
Right speaker			Left speaker
Black			Red
	LEFT
	RIGHT
	RATESD SPEAKER		Black
Red	IMPEDANCE :
	4	OHMS MIN.
1		2	3

Connect each speaker wire to the SPEAKER ter- minals as shown.

Use speakers with an impedance of 4 ohms or more, since lower impedance speakers can damage the unit.

Notes:

●Connect the black wire to the minus (–) terminal, and the red wire to the plus (+) terminal.

●Do not mix the right channel and left channel wiring when connecting the speakers to the unit.

●Do not let bare speaker wires touch each other as this may damage the amplifier and/or speakers.

●The speaker grille is not detachable.

6