Sharp MD-M1H Remote control, To change the brightness of the display, Precautions for battery use

(Continued)
■ Remote control
● 2	"AA" size batteries
(UM/SUM-3, R6, HP-7
or similar)
Remote
sensor
0.2 m - 6 m
(8" - 20')
15	15

●When inserting or removing the batteries, push

them toward the Ïbattery terminal.

●Installing the batteries incorrectly may cause the unit to malfunction.

Precautions for battery use:

●Insert the batteries according to the direction in- dicated in the battery compartment.

●Replace all old batteries with new ones at the same time.

●Do not mix old and new batteries.

●Remove the batteries if they are weak or if the unit will not be used for long periods of time. This will prevent potential damage due to battery leakage.

Caution:

Do not use rechargeable batteries (nickel-cadmium battery, etc.).

Notes concerning use:

● Replace the batteries if the operating distance is reduced or if the operation becomes erratic.

● Periodically clean the transmitter LED on the remote control and the sensor on the main unit with a soft cloth.

● Exposing the sensor on the main unit to strong light may interfere with operation. Change the lighting or the direction of the unit.

● Keep the remote control away from moisture, excessive heat, shock, and vibrations.

■To change the brightness of the display

(Remote control operation)

When bright

When dark

1 Press the ON/STAND-BY button to turn the power on.

2 Press the DIMMER button.

●The display will become dimmer.

To return to the original brightness:

Press the DIMMER button again.

8