Sharp MD-M1H Timer recording, Continued, 3 4,5,6,7,8 5,6,7,8, 1,10, To confirm the timer setting

(Continued)

●Before setting the timer, make sure that the clock setting is correct. (Page 9)

■Timer recording

Before timer recording, the following preparations are required.

●Load a CD, a recordable MD.

●Preset the radio station.

(Remote control operation)

3

4,5,6,7,8

5,6,7,8

	2
1,10	9

1 Press the ON/STAND-BY button to turn the power on.

2 Press the CD, TUNER(BAND), AUX button to select desired function.

3 Press the TIMER button to select the timer recording mode.

4 Whilst “f REC” is flashing, press the ENTER button.

REC REC

DISC TOC
TRACK
MEMORY
RANDOM	REC
TOTAL
REMAIN	SLEEP

5 Within 5 seconds, press the or button to set the hour to start, and then press the ENTER button.

REC

REC

6 Press the or button to set the minute to start, and then press the ENTER button.

REC

REC

●If not set manually, the ending time will automati- cally be set for one hour after the starting time.

7 Press the or button to set the hour to stop, then press the ENTER button.

	REC
DISC TOC
TRACK
MEMORY
RANDOM	REC
TOTAL
REMAIN	SLEEP

	REC
DISC TOC
TRACK
MEMORY
RANDOM	REC
TOTAL
REMAIN	SLEEP

8 Press the or button to set the minute to stop, then press the ENTER button.

	REC
DISC TOC
TRACK
MEMORY
RANDOM	REC
TOTAL
REMAIN	SLEEP

REC REC

9 Press the VOLUME button to adjust the sound volume.

●Be careful not to turn the volume up too high.

10 Press the ON/STAND-BY button to enter the stand-by mode.

●The TIMER STAND-BY indicator will light up.

11 When the timer start time is reached, timer recording will start.

12 When the timer end time is reached, timer recording will stop.

●“f REC” will disappear, and the timer mode will be cancelled.

The unit will enter the stand-by mode.

Notes:

●The timer cannot control the component con- nected to the Auxiliary Input sockets.

●When the available recording time has been con- sumed, the recording will stop.

●Timer playback and timer recording cannot be set at the same time using the timer.

Use the timer in one mode or the other.

To change the programmed contents:

Start again from step 1.

To confirm the timer setting:

Press the TIMER button once.

●The turn-on time, the turn-off time and name of sound source will be displayed.

To cancel timer operation:

1Whilst in the timer stand-by mode, press the ON/ STAND-BY button to turn the power on.

2Press the TIMER button repeatedly to turn off the timer, “f REC” will go out.

40