Sharp MD-M1H operation manual Move, To combine two non-contiguous tracks, Example

(Continued)

To combine two non-contiguous tracks:

(Example: the first and third tracks)

Move the third track to the second track using the MOVE function.

Then, combine the first and second tracks using the COMBINE function.

Notes:

●Tracks recorded from analogue inputs cannot be combined with tracks recorded from CDs or MDs using the digital inputs.

●Tracks recorded in the stereo mode cannot be combined with tracks recorded in the monaural long-play mode.

●Tracks where either track’s recording time is less than 15 seconds may not be combined.

●This function cannot be used in the random play mode and APMS play mode.

■Move

(Remote control operation)

2	4
2	3,5
	1

1

H

4 Select the new track position pressing the or button.

●To cancel the operation, press the ■ button.

5 Press the ENTER button again.

●The track is moved, and the unit is stopped at the beginning of the new track selected in step 4.

Notes:

●When a track has been moved, the other tracks which are affected will be assigned new track numbers automatically.

●This function cannot be used in the random play mode and APMS play mode.

Example:

When moving the fifth track to the third track, the old third track will become the new fourth track, and the old fourth track will become the new fifth track.

1 Whilst in the stop mode, select the track you want to move pressing the 5 3 or 2 4 button.

Or start playing the track to be moved, and then press the 0 6 button.

2 Press the NAME/TOC EDIT button, and within

10 seconds, select “MOVE” pressing the or button.

3 Within 10 seconds, press the ENTER button.

37