Sharp MD-M1H operation manual To change disc names and track names, To add a character, Continued

(Continued)

■To change disc names and track names

(Remote control operation)

NAME/	/ / /
TOC EDIT
	ENTER
CLEAR	5 3/
	2 4
	H

To add a character:

Example: To change “BET” to “BEST”

1 To change disc names, perform steps 1 - 3 on page 33.

To change track names, perform steps 1 - 2 on page 34.

2 Press the or button to make the character at the place you want to add a letter begin flash- ing.

●To cancel the operation, press the ■ button.

3 Select the character you want to add, pressing the or button. Then, press the ENTER button.

Example: To change “BESUT” to “BEST”

1 To change disc names, perform steps 1 - 3 on page 33.

To change track names, perform steps 1 - 2 on page 34.

2 Press the or button to make the character you want to erase begin flashing.

●To cancel the operation, press the ■ button.

3 Press the CLEAR button.

●After this step, if you are not going to enter a character, go to step 5.

4 Select the character you want to add, pressing the or button. Then, press the ENTER button.

●The selected character will be added, and the original characters will move to the right by one.

5 After entering all of the characters in the name, press the NAME/TOC EDIT button.

●The selected character will be added, and the original characters will move to the right by one.

4 After entering all of the characters in the name, press the NAME/TOC EDIT button.

Note:

●You cannot modify disc or track names created on other equipment if they are over 40 charac- ters.

In this case, erase the name and then enter a new name.

35