Nortel Networks 1000E warranty Insert CompactFlash to extend Eject button, Retaining Pin hole

Installing and configuring a Voice Gateway Media Card Page 333 of 488

4Insert the CompactFlash card in the socket.

Press firmly until it is fully seated and the Eject button extends (see Figure 109).

Figure 109

Insert CompactFlash to extend Eject button

Eject button

5Turn the Voice Gateway Media Card over to view the back of the card.

Identify the hole for the Retaining Pin. The hole (labeled a in Figure 110) is located approximately 1 inch (2.5 cm) above the lower lock latch and 1 inch (2.5 cm) from the card’s faceplate.

Figure 110

Retaining Pin hole

6Insert the Retaining Pin in this hole (labeled 1 in Figure 111).

Communication Server 1000E Installation and Configuration