Nortel Networks 1000E warranty Network Routing Service NRS stand-alone Signaling Server

Page 188 of 488 Installing and configuring the Signaling Server software

Figure 65

Network Routing Service (NRS) — stand-alone Signaling Server

CS 1000 Signaling Server Software Install Tool (sse-x.xx.xx)

=====================================================================

Please select the Network Routing Service (NRS) configuration for this Signaling Server.

Please enter:

<CR> -> <a> -		H.323	Gatekeeper and SIP Redirect/Proxy Server.
<b>	-	H.323	Gatekeeper only.
<c>	-	SIP Redirect/Proxy Server only.
Enter		Choice>

12Select the type of NRS to be provided by this Signaling Server. See Figure 66 for a co-resident Signaling Server. See Figure 67 on page 189 for a stand-alone Signaling Server.

•If this Signaling Server is to be the Primary NRS, enter a.

•If this Signaling Server is to be the Alternate NRS, enter b.

•If this Signaling Server is not a stand-alone Signaling Server and is to be the Failsafe NRS, enter c.

Refer to IP Peer Networking: Installation and Configuration (553-3001-213) for more information on the NRS.

Figure 66

NRS type — co-resident Signaling Server

CS 1000 Signaling Server Software Install Tool (sse-x.xx.xx)

=====================================================================

Please select the type of Network Routing Service (NRS) for this Signaling Server.

Please enter: <CR> -> <a> - Primary.

<b> - Alternate. <c> - Failsafe.

Enter Choice>

553-3041-210 Standard 4.00 September 2007