Nortel Networks 1000E warranty Lifting system components

Page 74 of 488 Rack-mounting the components

Media Gateway. The Media Gateway Expander would be approximately 1/4 in from the Media Gateway.

Note: In the 5u pattern, a “u” is equal to 1.75 in. and includes three holes spaced at 5/8 in. + 5/8 in. + 1/2 in.

Other data communications equipment can be installed in a rack with

CS 1000E system components.

IMPORTANT!

Ensure that the unit’s power cord is appropriate for the area’s electrical service. Do not modify or use the supplied AC power cord if it is not the correct type.

This chapter contains the following procedures:

•Procedure 1: "Rack-mounting a CS 1000E Call Server" on page 77

•Procedure 2: "Removing the cover" on page 78

•Procedure 3: "Rack-mounting a Media Gateway or Media Gateway Expander" on page 80

•Procedure 4: "Preparing a Signaling Server for rack-mounting" on page 83

•Procedure 5: "Rack-mounting a Signaling Server" on page 86

Lifting system components

Exercise care when lifting system components. If necessary, get assistance to lift a component or install components in a rack. Table 11 on page 75 lists the CS 1000E system components provided by Nortel and the weight of each

553-3041-210 Standard 4.00 September 2007