Nortel Networks 1000E warranty Installing and configuring IP Phones Page 396

Installing and configuring IP Phones Page 396 of 488

Introduction

The following IP Phones can be installed on a CS 1000E system:

•Nortel IP Phone 2001

•Nortel IP Phone 2002

•Nortel IP Phone 2004

•Nortel IP Softphone 2050

•Nortel IP Phone 2007

•IP Audio Conference Phone 2033

•WLAN Handsets 2210/2211/2212

•MVC 2050

The system must be configured before the IP phones can be installed. The configuration includes:

•The IP Phone TN blocks must be defined on the Call Server (See “Configuring VoIP bandwidth management zones” on page 408 or “Using Set-Based Installation” on page 433).

•The IP Phones are assigned to an IP telephony node, and use the IP telephony node properties defined using Element Manager (see “Configuring an IP telephony node” on page 365).

•The IP Phones require local boot parameter configuration (see “Configuring the IP Phone boot parameters” on page 424).

Communication Server 1000E Installation and Configuration