Nortel Networks 1000E warranty Node Password

Installing and configuring IP Phones Page 419 of 488

10Click SET.

The administrator password is set and enabled.

Figure 146

Node Password

Note: The entered password appears as asterisks. The valid characters are 0-9 * #. The password can be null or 6 to 14 digits in length.

WARNING

If the administrator password is null (zero length), then the Node ID, TN, and Password screens are not displayed on the IP Phones during their registration process. This provides security as it prevents any entry of passwords or TNs on the IP Phones. However, it is impossible to install new IP Phones (unless a temporary password is set).

11Select NodePwd from the Group drop-down list.

12Select nodePwdShow from the Command drop-down list.

13Click RUN.

The updated administrator IP Phone Installer Password is displayed in the text area at the bottom of the web page.

14Enter the temporary IP Phone Installer Password (see Figure 147):

a.Enter the password in the Node Password text box.

b.Select NodePwd from the Group drop-down list.

c.Select nodeTempPwdSet from the Command drop-down list. The area then displays the Uses and Timeout text boxes.

d.Enter a value for the number of uses or a value for timeout (in hours) or both.

Communication Server 1000E Installation and Configuration