Nortel Networks 1000E Adding a software daughterboard and remote security device, NTDK99AA

Page 226 of 488 Configuring a Small System Controller

Table 13

Small System Controller profile (Part 2 of 2)

Property	Description
Connectors	• Port 1 – 100BaseT
	•	Port 2	– 100BaseT (optional)
	•	Port 3	– 100BaseT
	•	Port 4	– 100BaseT (optional)
Required	• Remote Security Device (NTDK57DA)
components	•	Software daughterboard (NTM400)
Accessories	•	Flash daughterboard (NTTK25BA)
	• 100BaseT daughterboard (single port)
		(NTDK99AA)
	• 100BaseT daughterboard (dual port)
		(NTDK83AA)

Configuring an SSC can involve:

1Procedure 56: "Installing an SSC NTM400 Software daughterboard and NTDK57 (NT_REM) remote security device" on page 227.

2Procedure 57: "Adding a 100BaseT daughterboard (dual port) to an SSC" on page 227

3Procedure 58: "Adding a 100BaseT daughterboard (single port) to an SSC" on page 231.

Adding a software daughterboard and remote security device

A software daughterboard (NTM400) and a remote security device (NTDK57) (NT_REM) must be installed on the SSC. Follow Procedure 56 to install these required components.

553-3041-210 Standard 4.00 September 2007