Nortel Networks 1000E warranty Installing the software

Page 120 of 488 Installing software on the CS 1000E

IMPORTANT!

Systems and components delivered to customer sites may include preinstalled software. However, the pre-installed software versions are typically older and are included only for manufacturing and order management purposes. Do not attempt to operate the system with the pre-installed software. You must download the latest software from the Nortel Software Download web site and install the software as part of the installation process.

Installing the software

This section provides the steps involved in installing CS 1000 Release 4.5 for the CP PIV.

Procedure 22

Installing the software on the Call Server

1Check that a terminal is connected to COM1 on the Call Server.

2Insert the RMD into the CF card slot.

3Press the manual RESET button on the CP PIV card faceplate in the Call Server. EPE blocking message is possible.

4Enter <CR> at the Install Tool Menu.

553-3041-210 Standard 4.00 September 2007