Nortel Networks 1000E warranty Right ear bracket on a Media Gateway

Rack-mounting the components Page 81 of 488

3Attach the right ear bracket (marked with an “R”) to the holes on the right side of the Media Gateway.

a.Use two #8-32 machine screws. Position the ear bracket so that the four holes on the bracket flange are nearer to the rear of the Media Gateway.

Note: To determine the front of the bracket, locate the “R” on the bracket. The “R” must be at the top of the bracket and face the front of the Media Gateway (see Figure 17).

Figure 17

Right ear bracket on a Media Gateway

Bracket flange marked with an “R”. Attach this ear bracket to the right- hand side of the Media Gateway.

Attach the ear bracket to these holes.

4Attach the left ear bracket (marked with an “L”) to the holes on the left side of the Media Gateway (near the front).

Communication Server 1000E Installation and Configuration