Nortel Networks 1000E warranty Installing telephones, Using telephones

Safety instructions Page 35 of 488

Installing telephones

Follow these safety instructions when installing telephone equipment:

•Never install telephone wiring during a lightning storm.

•Never install a telephone jack in wet locations unless the jack is designed for wet locations.

•Never touch an uninsulated telephone wire or terminal unless the telephone line is disconnected at the network interface.

•Use caution when installing or modifying telephone lines.

Using telephones

These safety precautions are intended to reduce the risk of fire, electric shock, and personal injury. Always follow these basic safety precautions when using telephone equipment:

•Follow all warnings and instructions marked on the product.

•Before you clean a telephone, remove the plug from the wall outlet. Use a damp cloth for cleaning. Do not use liquid cleaners or aerosol cleaners.

•Do not use the telephone near water (for example, near a tub or sink).

•Do not place the telephone on a piece of furniture that is unstable. The telephone can fall, causing serious damage to the telephone.

•Slots in the Media Gateway and the telephone are for ventilation. These slots protect the equipment from overheating. Never block or cover these slots.

•Never block the openings on a telephone by placing it on a surface like a bed, sofa, or rug. Never place a telephone near or over a radiator or heat register. Do not place it in a built-in installation, unless there is correct ventilation.

•Only operate a telephone from the type of power source indicated on the marking label. If you are not sure of the type of power supply, check with your distributor.

Communication Server 1000E Installation and Configuration