Operation
5.5.8Edit the Liebert LDM Unit Properties
The Unit properties box displays the name, DIP switch address and software address of the Liebert LDM unit:
•LDM Unit Name - a name assigned to the Liebert LDM unit.
To make a change, click in the LDM Unit Name box, click Edit and enter a name, then click Apply.
•DIP Switch Address - the Modbus address determined by the Modbus address DIP switch setting.
The address can be changed by reset- ting DIP switches on S2 on the BCB.
•Software Address - a
To make a change, click in the Software Address box, click Edit and enter a value, then click Apply.
•When finished, click Install to Unit to upload the changes to the Liebert LDM.
NOTE
Unit |
|
| Panel | |||
Properties |
| Properties | ||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Install to Unit
(click to save changes to Liebert LDM)
The configuration changes will not be stored in the Liebert LDM until the Install to Unit button is clicked.
5.5.9Edit the Panel Properties or Set a Password
The Panel properties box displays the name of the selected panelboard, as well as a Password box for creating a password to protect against unwarranted changes to the configuration:
•Panel Name - the default panelboard names are PANEL A and PANEL B.
To change a name, click in the Panel Name box, click Edit and enter a name, then click Apply.
•Password - a password required for users to make changes to the configuration file. To create a password:
•Click in the Password box, click Edit and enter a password.
The password may be up 10 characters long and may consist of any combination of numbers, letters and special characters. The password is not
•Click Apply.
•When finished, click Install to Unit to upload the changes to the Liebert LDM.
NOTE
The configuration changes will not be stored in the Liebert LDM until the Install to Unit button is clicked.
25