Operation
5.5Using the Configuration Tool
The Configuration tool allows users to set up breakers and view or change their parameters and alarm setpoints.
NOTE
End users are unable to create a configuration file. Only Emerson Network Power technical personnel can create a unique configuration file. Please contact your local Emerson Network Power representative or call Liebert Services at
5.5.1Starting the Configuration Program
Before starting the Configuration tool, make sure you have the most recent version of the software and decide whether you want to connect to the Liebert LDM or work in offline mode.
Offline mode allows you to run the configuration tool without being connected to the equipment. (Prior to Version
NOTE
A configuration file is required for Offline Mode. If one is not available, connect to the equipment locally and save the configuration to disk. See 5.5.4 - Install Configuration Changes in the Unit and 5.5.5 - Save the Configuration File to Disk.
To Connect via COM Port | To Work in Offline Mode | ||
1. | If needed, download the latest version of the | 1. | If needed, download the latest |
| software (see 5.3 - Downloading the |
| version of the software (see 5.3 - |
| Software). |
| Downloading the Software). |
2. | Connect a PC to the Liebert LDM via the external | 2. | Run the file |
| DB9 connection. Refer to 5.2.1 - LDM Setup |
| (where xx is the version number) to |
| Port Connection. |
| start the Configuration program. |
3. | Run the file | 3. | In the Connect window, click the |
| the version number) to start the Configuration |
| Work Offline button, shown below. |
4. | program. | 4. | When prompted for the |
In the Connect window, select the appropriate |
| configuration file, navigate to the | |
| COM port from the list of available ports. |
| location of the file. |
5. | Click Connect. | 5. | Click Open. |
|
|
|
|
COM port | Work Offline |
|
Proceed to 5.5.2 - Main Configuration Window Overview to begin configuration.
When a local connection to the Liebert LDM can be performed, load the configuration using the instructions in 5.5.3 - Load a Configuration File from Disk.
21
