Nortel Networks 1000E warranty Network Routing Service NRS co-resident Signaling Server

Installing and configuring the Signaling Server software Page 187 of 488

11Select the Network Routing Service (NRS) to be provided by this Signaling Server. See Figure 64 for a co-resident Signaling Server or Figure 65 on page 188 for a stand-alone Signaling Server.

•Enter a if this Signaling Server will provide an H.323 Gatekeeper and a SIP Redirect/Proxy Server.

•Enter b if this Signaling Server will provide only an H.323 Gatekeeper.

•Enter c if this Signaling Server will provide only a SIP Redirect/Proxy Server.

•Enter d if this Signaling Server is a Leader Signaling Server and will not provide an NRS. Go to step 13 on page 189.

Refer to IP Peer Networking: Installation and Configuration (553-3001-213) for more information on the NRS.

Figure 64

Network Routing Service (NRS) — co-resident Signaling Server

CS 1000 Signaling Server Software Install Tool (sse-x.xx.xx)

=====================================================================

Please select the Network Routing Service (NRS) configuration for this Signaling Server.

Please enter:

<CR> -> <a> -		H.323	Gatekeeper and SIP Redirect/Proxy Server.
<b> -		H.323	Gatekeeper only.
<c>	-	SIP Redirect/Proxy Server only.
<d>	-	None.
Enter		Choice>

Communication Server 1000E Installation and Configuration