Nortel Networks 1000E warranty DAT command

Page 468 of 488 Configuring MG 1000T survivability and alternate primary controller

The RIB command restores data from the MG 1000T Core’s internal backup flash drive to its (c:) drive and from the Survivable MG 1000T Expansions’ internal backup flash drive to the (c:) drive.

The RIB command is illustrated in Figure 158 on page 471.

Only one MG 1000T Expansion is shown for illustration purpose; however, the synchronization is performed sequentially on all Survivable MG 1000T Expansions.

DAT command

Use the DAT command to print the data issue and creation date of the

CS 1000E’s primary and backup databases, as well as those of the Survivable Media Gateways. The software release of the Survivable Media Gateways must match that of the CS 1000E.

The DAT command is available in LD 43.

553-3041-210 Standard 4.00 September 2007