Nortel Networks 1000E Perform a customer backup data dump installation release, Loss of Data

Installing software on the CS 1000E Page 151 of 488

Switch call processing

Procedure 32

Switching call processing

LD 135	Load program
SCPU	Switch call processing from Call Server 0
	to Call Server 1
	Call Server 1 is now the active call processor.
		End of Procedure

Perform a customer backup data dump (installation release)

Procedure 33

Performing a data dump to backup the customer database:

1Log in to the system.

2Insert a CF card into the active Call Server RMD slot to back up the database.

3Load the Equipment Data Dump Program (LD 43). At the prompt, enter:

LD 43 Load program.

.EDD

4When “EDD000” appears on the terminal, enter:

EDD Begin the data dump.

CAUTION — Service Interruption

Loss of Data

If the data dump is not successful, do not continue; contact your technical support organization. A data dump problem must be corrected before proceeding.

Communication Server 1000E Installation and Configuration