Nortel Networks 1000E warranty Procedure Installing the Krone Test Jack Frame UK

Page 358 of 488 Installing the Main Distribution Frame

Procedure 90 describes how to install the Krone Test Jack Frame for the UK. For detailed information, refer to the Krone documentation.

Procedure 90

Installing the Krone Test Jack Frame (UK)

1Refer to the equipment layout plan to determine where to place the cross-connect terminal.

2Lay out the terminal blocks as shown in Figure 124 on page 359.

3Attach labels on the cross-connect terminal to indicate the terminal blocks assigned to the following:

•Analog Line cards

•DC15/AC15/RAN/PAG cards

•Data Access cards

•AUX wiring

•Power Fail Transfer Units

•Digital Line cards

•Telephones

•Exchange Line Trunk cards

•Direct Dialing Inward trunk cards

•Miscellaneous equipment

553-3041-210 Standard 4.00 September 2007