Nortel Networks 1000E warranty IP Phone firmware, Voice Gateway Media Card loadware

Page 184 of 488 Installing and configuring the Signaling Server software

Figure 60

IP Phone firmware

CS 1000 Signaling Server Software Install Tool (sse-x.xx.xx)

=====================================================================

The installation source contains multiple Internet Telephone firmware files.

Copying /cd0/0603Bxx.bin” to “/u/fw/0603Bxx.bin”.

Copying “/cd0/0602Bxx.bin” to “/u/fw/0602Bxx.bin”.

Copying “/cd0/0604Dxx.bin” to “/u/fw/0604Dxx.bin”.

Figure 61

Voice Gateway Media Card loadware

CS 1000 Signaling Server Software Install Tool (sse-x.xx.xx)

=====================================================================

The installation source contains multiple Voice Gateway Media Card loadware files.

Copying “/cd0/IPL4xxxx.p2” to “/u/fw/IPL4xxxx.p2”.

Copying “/cd0/IPL4xxxx.sa” to “/u/fw/IPL4xxxx.sa”.

The system echoes the ELAN network interface MAC address.

For future reference, the ELAN MAC address is: “00:02:b3:c5:5l:c6”.

This address is found on the face of the Signaling Server, on the right-hand side when the bezel door is open.

Note: The ELAN network interface MAC address must be configured in the Element Manager node configuration web page.

553-3041-210 Standard 4.00 September 2007