Nortel Networks 1000E warranty LD 117 Bandwidth management zone commands, Command Description

Page 212 of 488 Configuring the CS 1000E Call Server

LD 117 – Bandwidth management zone commands

Command	Description
NEW ZONE xxx p1 p2 p3 p4 p5	Create a new zone, where:
	xxx = zone number = (0) - 255.
	p1	= Intrazone available bandwidth
	= 0 - (10 000) - 100 000 (Kbps)
	p2	= Intrazone preferred strategy
	= (BQ for Best Quality) or BB for Best Bandwidth
	p3	= Interzone available bandwidth
	= 0 - (10 000) - 100 000 (Kbps)
	p4	= Interzone preferred strategy
	= BQ for Best Quality or BB for Best Bandwidth
	p5	= Zone resource type
	= (shared) or private
NEW ZONE xxx	Create a new zone with default values for the parameters:
	p1	= 10 000 (Kbps)
	p2	= BQ
	p3	= 10 000 (Kbps)
	p4	= BQ
	p5	= shared
CHG ZONE xxx p1 p2 p3 p4 p5	Change parameters of a zone. All parameters, including
	those that are unchanged, must be re-entered.
OUT ZONE xxx	Remove a zone.
DIS ZONE xxx	Disable a zone. When a zone is disabled, no new calls are
	established inside, from, or toward this zone.
ENL ZONE xxx	Enable a zone.
PRT ZONE xxx	Print zone and bandwidth information.

End of Procedure

553-3041-210 Standard 4.00 September 2007