HP LTO 4 FC Action, The software must issue a LOAD before media access, Sense keys and codes

Code	Meaning	Comments
04 01	LUN in process of	A media access command has been received while a
	becoming ready	load is occurring with immediate report on, or initiated
		through the front panel, or a different host initiated the
		command.
	Action:	1.	Effectively poll the drive by re-sending the command
			until the media is loaded, when UNIT ATTENTION with
			additional sense of 28 00h will be set if the tape was
			inserted via the front panel. Otherwise poll the drive
			(TUR) until GOOD status is reported. At this point the
			command can be executed.
		2.	Report to the console that the drive is in the process
			of loading tape.
04 02	LUN not ready, initializing	A cartridge is present in the drive but is not logically
	command required	loaded.
	Action:	1.	The software must issue a LOAD before media access
			is permitted.
		2.	Issue a message to the console to request a
			user-initiated load, or to indicate drive status, or both.
04 07	Command in progress	The tape drive is currently executing an immediate mode
		command.
04 0C	LUN not accessible, port in	The command is not available on the specified logical
	unavailable state	unit when sent to the drive through the specified port.
04 12	Logical unit offline	The command cannot be executed because the specified
		logical unit has not yet been configured via the
		appropriate port.
0B 01	Thermal limit exceeded	There has been a failure due to the drive temperature
		being outside the acceptable range.

60 Sense keys and codes

HP restricted