Nortel Networks 1000E warranty Txd, Dtr Dsr/Dcd Gnd, Rts Cts

Page 256 of 488 Connecting a Terminal Server

Table 15

Customer made cable pin out

Pins on DB9 Female		Pins on RJ45 Male (MRV Terminal Server)
3	TXD	6	RxD
4	DTR	7	DSR/DCD
5	S GND	4	TxD GND
		5	RxD GND
7	RTS	1	CTS
8	CTS	8	RTS
9	N/C

Procedure 62

Connecting a Terminal Server to the system

1Connect the MRV P/N-151-3028 serial cable from the Terminal Server console port 20 to the PC COM port.

WARNING

Port 20 is the default console port. Do not change the configuration for port 20.

2Plug MRV PC Card (in MRV package) into Terminal Server faceplate socket, and power on the Terminal Server.

3Start the MRV HyperTerminal application. In Windows:

Start > Programs > Accessories > Communication > HyperTerminal.exe

4Configure HyperTerminal to communicate with the Terminal Server’s management port:

553-3041-210 Standard 4.00 September 2007