Nortel Networks 1000E warranty Installing IP Phone hardware components, Node Temp Password

Installing and configuring IP Phones Page 420 of 488

15Click SET.

The temporary password is set.

Figure 147

Node Temp Password

Note 1: The entered password appears as asterisks. The valid characters are 0-9 * #. The password can be 6 to 14 digits in length.

Note 2: The temporary password automatically deletes itself after it has been used the defined number of times or when the duration expires, whichever comes first.

16Select NodePwd from the Group drop-down list.

17Select the nodePwdShow command from the Command drop-down list.

18Click RUN.

The updated temporary IP Phone Installer Password is displayed.

End of Procedure

Installing IP Phone hardware components

Follow Procedure 106 to install IP Phone hardware components.

Procedure 106

Installing IP Phone hardware components

For details on installing hardware components, see IP Phones: Description, Installation, and Operation (553-3001-368).

1Refer to Figure 148 on page 421, when installing the following:

a.Footstand

b.3-Port Switch only on the IP Phone 2004, required if a single Ethernet connection is shared with a PC

c.Ethernet cable from the set to the 3-Port Switch

d.Power Transformer or Power Splitter for Power over LAN unit

Communication Server 1000E Installation and Configuration