Nortel Networks 1000E warranty Procedure Removing the cover

Page 78 of 488 Rack-mounting the components

The 19 Inch Rack Mount Kit (NTTK09) contains the following accessories:

•1 – left guide bracket

•1 – right guide bracket

•1 – left ear bracket

•1 – right ear bracket

•4 – #8-32 machine screws

Follow Procedure 2 on page 78 to remove the cover on a Media Gateway or a Media Gateway Expander.

Procedure 2

Removing the cover

1If the cover lock latches are in their locked position:

a.Use a flat screwdriver to slide the icon away from the latch. Refer to Figure 14 on page 79.

b.Slide both spring-loaded latches simultaneously down toward the bottom of the Media Gateway, and pull forward. Then lift the cover upward to remove it from the Media Gateway. Refer to Figure 15 on page 79.

Note: The bottom of the front cover is supported by, but not secured to, the Media Gateway. Do not drop it.

553-3041-210 Standard 4.00 September 2007