Nortel Networks 1000E warranty Telnet Terminal Server virtual management port

Page 258 of 488 Connecting a Terminal Server

define server ip primary gateway address [ip address]

4Check Terminal Server configuration. Enter:

list server ip

Example commands:

define server ip address 172.16.3.50

define server ip subnet mask 255.255.255.0

define server ip primary gateway address 172.16.3.1

End of Procedure

Telnet Terminal Server virtual management port

Connect the Terminal Server ethernet port to the ELAN using a CAT5 ethernet cable. The virtual management port 0 is accessible from an online PC using a telnet session. The Terminal Server can now be configured from the on-line PC.

Procedure 64

Run telnet from PC

1Use Start > Run

Input telnet command: telnet ip-address port#

Where:

ip-address: Terminal Server IP address

Port#: The target port number on Terminal Server=2000+(xx x 100) For Terminal Server virtual management port xx=0

Example: telnet 172.16.3.50 2000

2Press <CR> until the MRV login prompt appears.

3Input login password and username to log in to the virtual management port. The default password is "access".

End of Procedure

553-3041-210 Standard 4.00 September 2007