Nortel Networks 1000E warranty 229

Configuring a Small System Controller Page 229 of 488

4Install the 100BaseT daughterboard (dual port) in slot 2 of the SSC:

a.Locate the alignment pin on the SSC.

b.Insert the alignment pin into the appropriate hole on the daughterboard.

c.Secure the 100BaseT daughterboard (dual port) using metal screw-downs on the SSC.

d.Route the NTDU0606 Ethernet cable(s) through the plastic guides on the SSC.

Figure 82 on page 230 shows an SSC with two 100BaseT

Daughterboards (dual port).

5Install the SSC in a Media Gateway.

6Connect each labeled Ethernet cable to the corresponding port number bulkhead connectors.

CAUTION — Service Interruption

7Reinstall the front cover.

End of Procedure

Communication Server 1000E Installation and Configuration