Panasonic WV-CW504S When using the SUPER-D5function, When not using the SUPER-D5function, Step

Note:

•When "ON" or "ON(i-VMD)" is selected for "SUPER-D5", the following settings will be restricted.

SHUTTER: Only OFF and 1/100 are available. (☞ page 11)

SENS UP: Only "OFF" and "AUTO" become available. (☞ page 12)

•When "ON" or "ON(i-VMD)" is selected for "SUPER-D5", a shadow (black line) may appear at the boundary between a brighter area and a darker area. This is not a malfunction.

•When "ON" or "ON(i-VMD)" is selected for "SUPER-D5", the SUPER-D5 function will become more effective by slightly increment- ing "LEVEL". However, flickering or noise may be observed frequently when "LEVEL" is too much incremented.

•When flickering or noise is observed frequently due to the illumination of light, select "OFF".

(1)When flickering or color deterioration is observed

(2)When noise is produced in a bright area on the screen

•When "ON(i-VMD)" is selected for "SUPER-D5", performance of the motion detection will vary depending on the i-VMD settings.

(☞ Steps 4 - 6 on page 18)

When using the SUPER-D5 function

Follow the procedure below.

Step 1

Move the cursor to "LEVEL" and use the right or left button to adjust the level.

Step 2

The dark area of the object is automatically corrected to lighten it.

Move the cursor to "MANUAL ABS" and press the setting button.

→The area setting screen appears.

Step 3

Move the cursor to "POSITION" and press the setting button.

Step 4

Use the up, down, right, and left buttons to determine the left upper position of the area to be set and press the setting button.

Step 5

Use the up, down, right, and left buttons to determine the right lower position of the area and press the setting button.

Note:

•To delete an area, move the cursor to "DEL" and press the setting button.

•The area to be brighter becomes circular.

•The bright level of an area cannot be specified.

•Only one area can be set.

When not using the SUPER-D5 function

Follow the procedure below.

Step 1

When the SUPER-D5 function is set to "OFF", bright areas of an image are masked to facilitate the visibility of dark areas. Move the cursor to "MASK SET" and press the setting button.

→The mask setting screen appears.

10