Panasonic WV-CW504S manual Set the detection areas, OBJECT DET screen, Step, MOTION DET screen

Step 4

Move the cursor to "AREA" and select the area for which the detection of appearance/disappearance of stationary objects is to be set.

ALL (default): All areas will be set as the detection area.

SETUP: When the setting button is pressed after selecting "SETUP", up to 2 areas can be set as the detection area. Refer to the description below for how to configure the settings.

Step 5

Move the cursor to "SENSITIVITY" and press the setting button.

→The "SENSITIVITY" screen appears.

Step 6

Move the cursor to "MIN SIZE" and select the minimum size of objects detected from the following: The size options will be displayed in a green frame in the center of the screen. In "OFF" position, any object will be detected regardless of its size.

Perform the setup while viewing the detection result displayed on the screen. OFF (default)/SMALL/MEDIUM/LARGE

Note:

•The detection areas set in step 4 will be displayed as a white frame on the "SENSITIVITY" screen.

•When appearance/disappearance of a stationary object is detected, a red frame will be displayed on the "SENSITIVITY" screen.

Set the detection areas

Set the detection areas for motion detection and the detection of appearance/disappearance of stationary objects. Up to 2 detection areas can be set.

Follow the procedure below.

"MOTION DET" screen		"OBJECT DET" screen		Area setting screen
**MOTION DET**(1)		**OBJECT DET**(1)		**AREA 1 /2**(1)
MOTION	OFF	REMOVAL AND LEFT BEHIND			PUSH SW
LOITERING	OFF	DURATION TIME	10s	POSITION
DIRECTION	OFF
		AREA	SETUP	UPPER LEFT
AREA	SETUP	SENSITIVITY
SENSITIVITY
RET TOP END		RET TOP END		DEL
				RET TOP END

Step 1

Move the cursor to "AREA" and select "SETUP", and then press the setting button.

→The "AREA" screen appears.

Step 2

Move the cursor onto the number to select the area number using the right or left button.

Step 3

Move the cursor to "POSITION" and press the setting button.

18