Panasonic WV-CW504FK Configure frame display, Configure alarm notification, CAMERA SETUP screen

Configure frame display

Follow the procedure below.

"CAMERA SETUP" screen			"i-VMD SETUP" screen
	**CAMERA SETUP**		**i-VMD SETUP**(1)
SCENE1			MOTION DET
	ALC	ALC	OBJECT DET	OFF
	SHUTTER	OFF	SCENE CHANGE	OFF
	AGC	ON(HIGH)	INDICATOR
	SENS UP	OFF		OFF
	WHITE BAL	ATW1	ALARM	CONT
	DNR	HIGH
	BW MODE	AUTO1
	i-VMD		RET TOP END
	RET TOP END

Step 1

Move the cursor to "i-VMD" and press the setting button.

→The "i-VMD SETUP" screen appears.

Step 2

Move the cursor to "INDICATOR" and determine whether or not to display a frame around the screen from the following. OFF (default): Does not display a frame.

ON(ALL): Displays a frame.

ON(OBJ): Display the appearance/disappearance frame only.

Configure alarm notification

Follow the procedure below.

"CAMERA SETUP" screen			"i-VMD SETUP" screen
	**CAMERA SETUP**		**i-VMD SETUP**(1)
SCENE1			MOTION DET
	ALC	ALC	OBJECT DET	OFF
	SHUTTER	OFF	SCENE CHANGE	OFF
	AGC	ON(HIGH)	INDICATOR	OFF
	SENS UP	OFF
	WHITE BAL	ATW1	ALARM	CONT
	DNR	HIGH
	BW MODE	AUTO1
	i-VMD		RET TOP END
	RET TOP END

Step 1

Move the cursor to "i-VMD" and press the setting button.

→The "i-VMD SETUP" screen appears.

Step 2

Move the cursor to "ALARM" and configure alarm notification. CONT (default): Continues to send alarm signals upon detection. 1TIME: Sends an alarm signal only once (100 ms) at detection start.

20