Perform the settings relating to the motion detection
Perform the settings relating to the motion detection as follows. It is possible to detect only objects that moves to the direction speci- fied in advance or objects that keeps on moving for a certain duration. Up to 4 motions can be simultaneously detected.
Follow the procedure below.
"CAMERA SETUP" screen |
| "MOTION DET" screen | "SENSITIVITY" screen | ||||||||||
| **CAMERA SETUP** | **MOTION DET**(1) | **SENSITIVITY**(1) | ||||||||||
SCENE1 |
| MOTION |
| DET |
|
| MOTION | OFF | SENSITIVITY | LOW |
| ||
| ALC | ALC | OBJECT |
| DET |
| OFF | LOITERING | OFF | MIN SIZE | OFF |
| |
| SHUTTER | OFF | SCENE CHANGE | OFF | DIRECTION | OFF |
|
|
| ||||
| AGC | ON(HIGH) | INDICATOR | OFF | AREA | ALL |
|
|
| ||||
| SENS UP | OFF |
|
|
| ||||||||
| WHITE BAL | ATW1 | ALARM | CONT | SENSITIVITY |
|
|
|
| ||||
| DNR | HIGH |
|
|
|
|
|
|
|
|
|
| |
| BW MODE | AUTO1 |
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
| |
| RET TOP END |
| RET TOP END |
| RET TOP END |
| RET TOP END |
|
| ||||
Step 1
Move the cursor to
→The
Step 2
Move the cursor to "MOTION DET" and press the setting button.
→The "MOTION DET" screen appears.
Step 3
The setting of the motion detection mode is performed. This unit has 3 types of motion deteciton modes.
Detect motion of objects
Move the cursor to "MOTION" and select from the following.
ON: Provides an alarm signal when motion is detected.
OFF (default): Does not detect motion.
Detect objects that move continuously within a specified period
Move the cursor to "LOITERING" and select the duration from the following:
When a continuously moving object is detected within a specified period, an alarm signal is issued.
OFF (default)/ON (5 s)/ON (10 s)/ON (20 s)/ON (30 s)/ON (40 s)/ON (50 s)/ON (1 min)
Detect objects that move into the specified direction
Move the cursor to "DIRECTION" and select the direction from the following:
An alarm signal will be sent out when an object moves to the specified direction.
OFF (default)/ON (c)/ON (c)/ON (a)/ON a( )/ON (d)/ON (d)/ON ([)/ON ([)
Step 4
Move the cursor to "AREA" and select an area for which the motion detection is to be set. All the alarm actions selected in step 3 will be applied to this area.
ALL (default): All areas will be set as the detection area.
SETUP: When the setting button is pressed after selecting "SETUP", up to 2 areas can be set as the detection area. Refer to page 18 for how to configure the settings.
Step 5
Move the cursor to "SENSITIVITY" and press the setting button.
→The "SENSITIVITY" screen appears.
16
