Additional Information
Last Condition Memory
DVD CD VCD1.1
This player memorizes the last condition for the last disc you have watched. Settings remain in memory even if you remove the disc from the player or switch off the player. If you load a disc that has its settings memo- rized, the latest stop position is automatically recalled.
Notes
–Settings are stored in memory for use any time.
–This player does not memorize settings of a disc if you switch off the player before commencing playback.
Screen Saver
A screen saver image appears when you leave the DVD Player in stop mode for about five minutes.
After the Screen Saver has been engaged for about five minutes, the DVD Player will automatically turn itself off.
Video Mode Setting DVD VCD2.0 VCD1.1
With certain discs, the playback picture may be flick- ering or Dot Crawl is shown on straight lines. That means Vertical interpolation or
To change the video mode, press and hold DISPLAY about 3 seconds during disc playback. The new video mode number selected is displayed on the TV screen. Check whether the video quality has improved. If not, repeat the above procedure until pic- ture quality is improved.
Video mode change sequence:
MODE1 → MODE2 → MODE3 → MODE4 →
MODE5 → MODE1
If you turn off the power, the video mode will return to initial default state (Auto).
HDCD Playback
HDCD is a process that increases the fidelity of both specially encoded HDCD discs and standard CD audio discs. When an
To enjoy the benefits of HDCD, your DVD Player must be connected to your A/V receiver via the Analog Audio Outputs. However, if your A/V receiver or surround processor is equipped with
22