Nortel Networks 1000E warranty 100Baset daughterboard dual port LED cable connector

Page 228 of 488 Configuring a Small System Controller

a.Attach the appropriate port number label “2” or “4” to the respective cable.

b.Install these cables firmly into the RJ-45 ports on the 100BaseT daughterboard (dual port) #2. Completely insert each cable. See Figure 82 on page 230 and Figure 83 on page 231.

CAUTION — Service Interruption

The RJ-45 connectors located on the top of the 100BaseT daughterboard (dual port) are for Media Gateways 1 and 3.

The RJ-45 connectors located on the bottom of the 100BaseT daughterboard (dual port) are for Media Gateways 2 and 4.

3Insert the red black yellow LED cable on the SSC into the LED connector on the 100BaseT daughterboard (dual port). See Figure 81 on page 228. This connection provides the link status display on the front cover.

Figure 81

100Baset daughterboard (dual port) LED cable connector

553-3041-210 Standard 4.00 September 2007