Installing and configuring IP Phones Page 427 of 488

b.Enter 1 to configure manual VLAN. The IP Phone prompts:

VLAN: x

Go to step 14 on page 427.

c.Press the OK key. The IP Phone prompts:

Invalid TN: x.x

Reason: Unequipped.

Go offhook to do SBI

14Enter the VLAN ID. The IP Phone displays:

Locating server...

If you did not configure an IP Phone Installer Password, after several seconds, the IP Phone prompts:

Node: x

TN: x.x

15Enter the node number and the IP Phone's (virtual) TN, then go to Step 18.

If you configured an IP Phone Installer Password, the IP Phone prompts:

Node: x

PassWord: x

16Enter the node number and the temporary or administrator IP Phone Installer Password.

Note 1: An asterisk is displayed for each password digit entered; the actual password is not displayed.

Note 2: If this screen times out, or if you do not successfully enter the password in three attempts, the IP Phone continues its registration process as if no entry had been made to this prompt. You can reboot the telephone and try again if more tries are needed.

The IP Phone prompts:

TN: x.x

Communication Server 1000E Installation and Configuration

Page 427
Image 427
Nortel Networks 1000E warranty Go to on Press the OK key. The IP Phone prompts